• Homepage
Knowledge Base
Date Updated : 02/26/2004
What Wiegand formats are supported?

In the LG IrisAccess™ 3000 system using EAC v1.241 software the following Wiegand formats are supported:

Standard format
HID Corp 1000
Casi Rusco 40

Other Wiegand formats are under development, please contact a sales representative if you have a specific requirement.
List of Articles
Date Updated
iData EAC Software Incorrect Wiegand output when ICU in iCAM+PIN mode 08/27/2007 
iData EAC Software DBMS error during log backup 08/09/2006 
iData EAC Software Auto-login IrisServer 03/27/2006 
iData EAC Software Internal Errors during install 03/24/2006 
iData EAC Software IrisServer returns an application error and will not run 05/26/2005 
iData EAC Software Key is not accepted during v1.6 install 05/26/2005 
iData EAC Software Please check the serial cable of the DIB on ICU 02/22/2005 
iData EAC Software How do you recover a lost password? 03/09/2004 
iData EAC Software What Wiegand formats are supported? 02/26/2004 
iData EAC Software Timeout! Please check the connection (Ethernet) with ICU3000 11/05/2003 
iData EAC Software Configuration for Door Relay 08/29/2003 
iData EAC Software Denied (IrisCheck Failed) 02/21/2003 
iData SoHo Software Upgrading the license key for SoHo Panel PC 04/01/2011 
iData SoHo Software iCAM taking long time to Identify with SoHo Panel PC 01/19/2010 
iData SoHo Software iDATA SoHo User Manual file 01/07/2010 
iData SoHo Software iDATA SoHo 1.04 update is available 01/07/2010 
iData SoHo Software iData SoHo Quickstart Guide file 01/07/2010 
iCAM TD100 Hardware Conformity to RMA Policy 08/04/2011 
iCAM TD100 Hardware Determining the version of firmware on the iCAM TD100 file 03/09/2011 
iCAM TD100 Hardware What version of Operating System am I running and is it 32 or 64 bit? file 03/08/2011